Post by sparepart on Mar 28, 2021 18:50:11 GMT
Was working solo in the studio yesterday took advantage of the quiet to address a bunch of networking stuff.
Using network cards pulled from dead UPS, the Makersapce UPS systems are now on the network, and can send alarms if the power fails.
Put up another Walltime in the Makerspace that syncs to the unit in the studio over the network. compdecon.org/wp-content/uploads/2021/03/thumb_img_0916-scaled.jpg
Final draft for countertop under the mixer sent to the fabricator. The drawing shows the Winsted 86030 base consoles below, with the Wheatstone R-60 and Ergotron LX monitor arms above. Countertop itself is the only part that we are paying for... compdecon.org/wp-content/uploads/2021/03/laminate_mixer_top_square_to_wall.jpg
SP