|
|
Post by station8 on May 20, 2017 2:47:10 GMT
Howdy all: I hope this helps out !
ELECTRONIC SUPPLIERS: NOTE: Some of these co carry enclosure s as well !!!!
1) Allied Electronic
2) All Electronics
3) Digi-Key
4) Electronic Goldmine
5) Jameco Electronic
6) Marlin P. Jones & Assoc. Inc.
7) Mcm Electronic
8) Mouser Electronic
9) Newark
10) Rf Parts
11) Arrow Electronic
12) Rainbow Electronic
13) Parts Express
14) Fair Radio Sales
15) Antique Electronic Supply
16) Surplus Supply Of Nebraska
17) Electronic Surplus
18) Grainger
19) Mc Master-Carr
20) Minikits.co
21) Kiesub Electronics
22) Circuit Specialists
23) Power Werx
24) Haako
25) Tyco
ENCLOUSURE BRANDS: NOTE: There could be other brands !!!!
1) Hoffman
2) Wiegmann
3) Ge
4) Adalet
5) Hammond
ENCLOSURE MFG.:
1) Mier Product Inc.
2) Bud Industries Inc.
3) Enclosure Hub
For water tight connector look up ( This is your clamp/seal for wire into the enclosure )
Liquid-Tight Cord Connectors
Hope this help out and do your home work !
Station 8
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 20, 2017 3:28:49 GMT
Station8 Is Our Go To Man for Part 15
Hey Jeff!
You really do know everything!
Amazing list.
|
|
|
|
Post by Boomer on May 20, 2017 4:47:11 GMT
I'd like an 'exclosure', everything would be built on the outside. Tyco is-was a toy company, I used to have Tyco stuff. If they deal with molding plastics, it might be the same company.
|
|
|
|
Post by station8 on May 20, 2017 5:27:41 GMT
Howdy All: Here is a correction.
Tyco is now TE CONNECTIVITY
Carl: I don't know everything I just do my research.
From my passed job I did work with metal enclosures & also modify them for the company's
President and VP as well for the engineers for the company.
Boomer: Tyco did make trains and toys.
But the Tyco I was talking about they made connectors,molex pins, Etc.now there under Te connectivity.
If you want an enclosure look under. ( Do a Google search on the company & Mfg )
BRANDS - And see what they have!
MFG - And see what they have!
That's it
Station 8
|
|
|
|
Post by station8 on May 20, 2017 6:07:40 GMT
Howdy You All: Here is something you also might want to know about.
Company called
GREENLEE
They make round punches and also db connector punches and other good stuff
I have worked with these punches and there great!
Check them out.
That's all
Station 8
|
|
|
|
Post by station8 on May 20, 2017 12:14:05 GMT
Howdy All: Keep this in mind as well!
When getting a enclosure should you use paint or powder coating?
You should use powder coating it cost a little more ,But will hold up in harsh weather better !
That's all for now
Station 8
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 20, 2017 12:52:06 GMT
Greenlee Experience
I still have a batch of Greenlee chassis punches that I bought when I did a lot of tube equipment building. Like Jeff says, they are great!
You start with an ordinary drill to make a hole in the metal, you put the strong screw attached to half of the Greenlee punch through the hole, screw on the other half of the punch, use a pliars to tighten and tighten and the punch actually cuts a smooth neat round hole through the metal.
I think I even have a square punch which will cut a square hole.
|
|
|
|
Post by thelegacy on May 20, 2017 15:15:19 GMT
Those square hole punches make it very nice for those little rubber stands that you can place at the bottom of your project to prevent it from scratching the surface of furniture or even your other components that you might stack it on top of.
|
|
|
|
Post by jimhenry2000 on May 21, 2017 3:21:36 GMT
I worked with Tyco now TE for years as one of my vendors. We purchased CWDM muxes and demuxes from them as well as other fiber related stuff including fiber enclosures. Howdy All: Here is a correction. Tyco is now TE CONNECTIVITY Carl: I don't know everything I just do my research. From my passed job I did work with metal enclosures & also modify them for the company's President and VP as well for the engineers for the company. Boomer: Tyco did make trains and toys. But the Tyco I was talking about they made connectors,molex pins, Etc.now there under Te connectivity. If you want an enclosure look under. ( Do a Google search on the company & Mfg ) BRANDS - And see what they have! MFG - And see what they have! That's it Station 8 |
|
|
|
Post by station8 on May 21, 2017 22:19:35 GMT
Howdy All:
Jim the company I worked for also ordered from tyco as well!
Just so you know you can get metal & plastic enclosure s from the company's above.
Now I can tell you the aluminum case for the procaster tx is to small for the sstran tx.
Keep in mind the procaster aluminum case was made special for them so finding the same case will be difficult
You will have to see what vendor will come close in what you need.
Happy hunting
Station 8
|
|
|
|
Post by jimhenry2000 on May 22, 2017 2:17:57 GMT
Actually while I put the transmitter out today in a Tupperware container, I remembered another enclosure I have from when I was evaluating strand mounted WIFI access points. I'm not going to swap out the Tupperware yet as my priority is to get the station on the air but down the road I'll put the 5000 in this enclosure. Howdy All: Jim the company I worked for also ordered from tyco as well! Just so you know you can get metal & plastic enclosure s from the company's above. Now I can tell you the aluminum case for the procaster tx is to small for the sstran tx. Keep in mind the procaster aluminum case was made special for them so finding the same case will be difficult You will have to see what vendor will come close in what you need. Happy hunting Station 8 Attachments:
|
|
|
|
Post by station8 on May 22, 2017 15:45:25 GMT
Howdy All: Nice case Jim!
Good luck on everything OK.
Have a great day
Station 8
|
|
