|
Post by part15engineer on Jan 22, 2022 15:00:09 GMT
Got my fcc part 15 am remotely located site up and running. I feed the omnia 3 am audio processor into a barix 500 streaming box set for PCM 16bit MSB @ 24kHz Mono. That feeds an avalan aw900m wireless link system with 5dbi omni antennas (15.247) then to the remote site is received by another avalan aw900m which goes to the barix 100 decoder box which than feeds the studio module of the chez procaster FCC part 15 certified 100mW AM transmitter on 1600 kHz (15.219) which broadcasts to the east building in addition to 91.9 FM (15.239) and 1560 AM (15.221) broadcasting to the west building. I now serve all 52 units with a quality signal and quality programming.
|
|
|
Post by Admin on Jan 22, 2022 15:42:40 GMT
Sounds like a system... What type of programming are you sending. Curious to know how it sounds at 24kHz or kbits.
I'll assume the wireless link is an IP based system to work with the Barix Box. I used Barix for the City's LPFM to link our studio to the TX site.
The Barix was always rock-solid and good quality sound.
|
|
|
Post by part15engineer on Jan 23, 2022 14:38:08 GMT
yes they are avalan part 15 spread spectrum IP based radios and the audio sounds surprisingly good. i run my oldies / classic hits format.
|
|