|
Post by part15engineer on May 5, 2018 13:42:33 GMT
i was given an old bext ptx 20 agile 2-30 watt exciter, i have it cranked to full power running through a short run of lmr400 w/N connectors to a dual band pass cavity running into a 125W dummy load using lmr240 / RG58 equivelent with / N connectors to my good all band portable the whole works goes less than 200ft. this setup should be well within part 15 fm limits.
and it puts out just enough f/s to drive my inovonics 630 off air mod monitor / translator receiver.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 5, 2018 14:09:55 GMT
Ready for the Future
Part15Engineer reports: "this setup should be well within part 15 fm limits."
And when the power increase comes through you will be in good shape!
|
|